SOURCE FILE REQUIREMENTS -
QUICKLOGIC Devices |
QUICKLOGIC source files must be provided for each device. These files will allow Test
Software Systems to develop test vectors for in-circuit testing.
REQUIREMENTS
| Source Files Required |
: |
.EDO |
| Design Software |
: |
QuickLogic SpDE Software |
| Supported Families |
: |
pASIC1, pASIC2, pASIC3 |
DEFINITIONS
| The .EDO file is a flattened EDIF netlist file. |
TECHNICAL INSTRUCTIONS to generate .EDO files:
| 1. |
From the SpDE Tools menu select OPTIONS --> SIMULATOR.
Select the simulator option: LMCEDIF.
(For older SpDE versions, go to the File menu, select
EXPORT LMCEDIF. Then select RUN.)
|
| 2. |
Go back to the Tools menu and select RUN TOOLS.
Click on the PLACE, ROUTE, and BACK ANNOTATION options. |
| 3. |
Select RUN. This executes the Place and Route sequence which is required to generate
the .EDO file. |
| 4. |
The resultant .EDO file should now be in the proper format and may be forwarded to
TEST SOFTWARE SYSTEMS.
Please include the associated component reference designator with the file. |
|
